The office building is situated in the very central part of the city of Sofia, at #5, Slavyanska street. This is abusy place characterized by good communications, situated in the immediate proximity of the Rakovskistreet and Slavyanska street crossing, and close to Tsar Osvoboditel Blvd., making it easily accessible fromall directions by car, public transportation or walking.
The building has six floors above the ground level, a terrace-like and sub-roof floor, and three undergroundfloors.
At basement levels B3 and B2 (-3 and -2) there are underground garages and technical areas, the totalnumber of parking spaces being 63. The access way to the underground garages is from Slavyanska street,using an electrically-driven vehicle loading platform.
At basement level B1, the ground floor and the first floor there are shops with locker rooms for theemployees and sanitary units. The stores have a common access way from Slavyanska street, and a separatestaircase and elevator provide access to the underground levels.
There are offices on the other floors above the ground. In the entrance lobby there is an area for a doorkeeper’sstation and a sanitary unit. A staircase and two elevators provide vertical connection between alllevels within the building.
Office building has been constructed in accordance with the latest building technologies, using highquality materials. The interior finishing works comply with the highest applicable standards, including:
1. Walls
1.1 Exterior facade – Brickwork 25 cm, red bricks, thermal insulation made of styropor with thicknessof 10 cm;
1.2 Between the adjoining buildings – Brickwork 25 cm, red bricks;
1.3 Standard interior – light partition walls made of “Knauf” plasterboards, supported, with thicknessof 12,5 cm, two-layered, extending from the double floor to the upper slab, insulation layer of 50 mm, made of 35 kg mineral wool
1.4 WC walls – light partition walls made of Rigips, with thickness of 10 cm (walls without installations)or 27 cm (walls with installed equipment), with built-in structures for the installation of wash-basins and built-in flushing cisterns “MEPA”;
1.5 Kitchen units - partition walls, “KNAUF”.
2. Floors
2.1 In the office rooms – double installation floor without flooring
2.2 WC and kitchens – waterproofing materials for WC and bathrooms, cement coat; Flooring:terracotta/fine stoneware (Granitogres) tiles;
2.3 In the corridors – double installation floor without flooring, granite grey/black G602/G654
3. Ceiling
3.1 In the offices – plasterboards painted in white latex paint, or suspended ceiling panels 300x1200,
with integrated lighting fittings in open/covered configuration and fire alarm sensors, according to thedesign;
3.2 WC and kitchens – suspended ceiling panels made of waterproof plasterboards, painted in whitelatex paint;
3.3 In the corridors – plasterboards painted in white latex paint, or suspended ceiling panels 300x1200,with integrated lighting fittings in open/covered configuration and fire alarm sensors, according to thedesign;
4. Doors
Entrance – reinforced steel doors, doorcase 100/200, with technological MDF coating, with triple closingmechanism, stoppers, lock, solid type, rubber sealing for the frame, metal adjustable frame;
5. Lighting fittings – “Megalux” lighting elements, energy-saving type, characteristics: dual parabolic,three sections, with mirror light-dispersing gratings. 500 lux intensity at each workplace, electronicadjustment, minimum pulsations. Integrated installation in the suspended ceiling panels in the officerooms and in the corridors.
6. WINDOWS and doors
The façade windows are made of ALUMINIUM WINDOWS SCHÜCO AWS 70.HI FOR EXTERNALWINDOWS ANDDOORS. Waterproof material will be installed along the perimeter of the window frames.
6.1. Windows characteristics:
Profile depth 70 mm
Good thermal insulation due to wide insulation zone – 27,5 mm
Window series with narrow face widths from 51 mm
Profiles available in a variety of colours
Concealed drainage
Drainage at the lowest profile point
Concealed Schüco AvanTec system fittings
Fully concealed so as not to spoil the clean lines of the window. New uniform handle design for allcustomary opening types.
Up to 160 kg vent weight.
Excellent corrosion resistance up to class 4 (>240 h SSN - tested in accordance with DINEN 1670). Extended horizontal, vertical adjustment as well as contact pressure adjustment
Excellent corrosion resistance up to class 4 (>240 h SSN - tested in accordance with DINEN 1670). Extended horizontal, vertical adjustment as well as contact pressure adjustment
Extensive range of profiles with face widths from 26 to 250 mm
Insert outer frame with adapter gasket to compensate for glazing thicknesses
6.2. GLAZING – Insulation glazing, produced by Guardian
South Facade :
Elevation 0.00: Insulation glassing - 32 mm, consisting of 2 float glass: Guardian HS SN51 Lami4.4.1 / Lami extra clear 4.4.1 with Argon Gas
Elevation +7.4 ÷ +22.40: Insulation glassing - 26 мм, 2 float glass - (Guardian HS SN51/28 6 мм /Бяло 4 мм) with Argon Gas
North Facade 1 Elevation 0.00 ÷ +22.40Insulation glassing - 26 мм, consisting of 2 float glass - (White 6 mm / Clima Guard Premium /LowE
/ 6 мм) with Argon Gas
North Facade 2 Elevation 0.00 ÷ +16.40
Insulation glassing - 26 mm, consisting of 2 float glass - (White 6 mm / Clima Guard Premium/LowE / 6 мм) with Argon Gas
West Facade – Elevation + 7.4 ÷ +16.40 Insulation glazing - 24 mm, consisting of 2 float glass -(Бяло4 мм / Clima Guard Premium /LowE / 4 мм) with Argon Gas
East FaçadeElevation + 0.00 ÷ +3.70 Insulation glassing - 26 mm, consisting of 2 float glass - (White 6 mm /Clima Guard Premium /LowE / 6 mm) with Argon Gas
Elevation + 7.4 ÷ +16.40 - (Guardian HS SN51/28 6 mm / White 6 mm) with Argon Gas
with Ug= 1.1 W/m2.K.
©2008-2024 "Domaza" Ltd. Date of last update 15/05/2024